Table of Contents
Advertisement
12 DTMF
12.1 Sending a DTMF Code Using the Autodial Key (Autodial)
12.1
Sending a DTMF Code Using the Autodial Key (Autodial)
Supported Models: Portable
Pressing the Autodial key sends a DTMF code. By using KPG-169D/ KPG-170D, the DTMF code to be sent can be
configured for each channel by selecting one of the DTMF codes in the Autodial List.
Configuration using KPG-169D/ KPG-170D
•
Assigning functions to the PF keys (
•
Configuring the DTMF code to be sent by selecting from the Autodial List (
Channel Edit > Page 2)
Autodial List
Supported Models: Portable
Autodial List is the list in which the DTMF code to be sent by pressing the Autodial key is configured. A list number in the
Autodial List can be configured for each channel by using KPG-169D/ KPG-170D.
When the Autodial key is pressed, the DTMF code corresponding to the list number in the Autodial List configured for the
selected channel is sent.
A maximum of 8 DTMF codes can be configured in the Autodial List by using KPG-169D/ KPG-170D.
Note
The DTMF code configured for No.1 in the Autodial List is also used as a code for Transpond when receiving an Individual Call. (Refer
to
Transceiver Behavior When Receiving a Selective Call on page
Configuration using KPG-169D/ KPG-170D
•
Configuring the Autodial List (
•
Configuring the DTMF code to be sent by selecting from the Autodial List (
Channel Edit > Page 2)
FUNC (K)/Ver 1.20
See
Edit > Key Assignment)
143.)
Edit > DTMF > Autodial List)
See
See
Edit > Zone Information >
Edit > Zone Information >
See
CONTENTS
INDEX
133
Advertisement
Table of Contents
