About Zones
About Zones
Zone data in a Conventional Group (Analog) or Conventional Group (NXDN) can be configured using KPG-169D/
KPG-170D/ KPG-175D/ KPG-175DN.
In addition, zone data for Site Roaming (NXDN) and Site Roaming with RAN (NXDN) can be configured as an NXDN
Conventional system zone. (Refer to
Conventional Group (Analog)
A zone in an Analog Conventional system consists of Conventional channels that are used for communicating in
analog mode.
Conventional Group (NXDN)
A zone in an NXDN Conventional system consists of Conventional channels that are used for communicating in digital
mode using the NXDN protocol.
Site Roaming
This zone consists of channels in an NXDN Conventional system in which Site Roaming is enabled.
Site Roaming with RAN
This zone consists of channels in an NXDN Conventional system in which Site Roaming is enabled.
Two zone data can be configured for the transceiver. A maximum of 16 channels data per zone can be configured for the
transceiver. A maximum of 32 channels data can be configured for the transceiver in total.
FUNC (K)/Ver 1.20
Zone Data
Conventional Group Zone Data 2
(Analog, NXDN, Site Roaming or Site Roaming with RAN)
Conventional Group Zone Data 1
(Analog, NXDN, Site Roaming or Site Roaming with RAN)
Channel Data
Channel Data
Channel Data
Figure 1-1 Zone Description
8.9 Site Roaming on page
76.)
CONTENTS
INDEX
x