Kenwood NX-240 Function Reference page 128

9 ANALOG CONVENTIONAL SYSTEM
9.4 Using 2-tone to Initiate a Selective Call
Clear to Transpond
Clear to Transpond allows the transceiver to wait to Transpond until the channel becomes available while other users are
using the channel.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
Configuring the Clear to Transpond to be enabled or disabled (
Short Decode
Short Decode is the function that the transceiver identifies the call type before the transceiver completes receiving the 2-
tone code.
The transceiver determines whether the received 2-tone code or Single Tone (Long Tone) matches the tone preconfigured
for the transceiver. If the tone matches, the transceiver immediately receives the tone.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
Configuring the Short Decode to be enabled or disabled (
Selective Call Alert LED
Selective Call Alert LED can be used to make the LED blink orange or blue when the transceiver receives a 2-tone code.
Whether to make the LED blink orange or blue can be configured in Decode LED.
A user can notice by the LED that the transceiver is receiving a call.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
• Configuring the Selective Call Alert LED to be enabled or disabled (
• Configuring the Decode LED (
FUNC (K)/Ver 1.20
See
Edit > 2-tone > Decode (2-tone 1 to 3))
See
See Edit > 2-tone > Decode (2-tone 1 to 3))
Edit > 2-tone > Decode (2-tone 1 to 3))
Edit > 2-tone > Decode (2-tone 1 to 3))
See
CONTENTS INDEX 103