Table of Contents
Advertisement
16 SCAN
16.4 Common Functions for Scan
QT/ DQT - Optional Signaling: OR Behavior
If the received QT tone or DQT code matches the QT tone or DQT code preconfigured for the receiving transceiver, the
transceivers pauses scanning. The transceiver emits the received audio and then waits to receive an Optional Signaling.
The transceiver resumes scanning after the amount of time configured for Dropout Delay Time elapses if the QT tone or
DQT code matching state is reset while waiting to receive the Optional Signaling.
If the transceiver pauses scanning when the received Optional Signaling matches the Optional Signaling preconfigured for
the transceiver, the transceiver does not resume scanning until the matching state of the Optional Signaling is reset.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
•
Configuring the Audio Control (Analog) (
•
Configuring the Audio Control (NXDN) (
16.4
Common Functions for Scan
The following functions are relevant to the scan:
•
Scan Temporary Delete (Portable Only)
•
Scan Delete/Add (Mobile Only)
•
Revert Channel
•
Dropout Delay Time
•
Transmit Dwell Time
•
Lookback
•
Off-hook Scan (Mobile Only)
•
Priority-channel Stop Tone
Temporarily Deleting a Channel to Be Scanned (Scan Temporary Delete)
Supported Models: Portable
Scan Temporary Delete is the function to temporarily delete a channel from a group of channels to be scanned.
With this function, a user can reliably receive a call from a primary channel by deleting unnecessary channels from a group
of channels to be scanned to increase the scan speed.
By selecting a channel to be scanned and pressing the Scan Temporary Delete key while the scan pauses, the channel
can be deleted temporarily from a group of channels to be scanned. This status is retained until the scanning is terminated
by pressing the Scan key and will be cleared when the scan completes.
Configuration using KPG-169D/ KPG-170D
Assigning functions to the PF keys (
FUNC (K)/Ver 1.20
Edit > Zone Information > Channel Edit > Page 1)
See
See
Edit > Zone Information > Channel Edit > Page 1)
See
Edit > Key Assignment)
CONTENTS
INDEX
175
Advertisement
Table of Contents
