Table of Contents
Advertisement
Installation
Unpacking the FE-165
WARNING! Risk of personal injury or injury to others.
1.
DO NOT lift the elevation unit unaided. This product
weighs up to 50.4 kg (111.1 lb).
2.
DO NOT lift the product by the camera mounting plate.
WARNING! If the FE-165 has been received or
subsequently transported with the legs removed, these
must be fitted before any other installation work can be
carried out. See the section Maintenance on page 30.
1.
With the assistance of
another person, use the
two grab handles on
the sides of the FE-165
to carefully lift it from
the transportation box.
2.
Remove all the other product components from the transportation
box.
3.
Ensure that all transportation packaging material and retaining
fixings are removed from the product components.
12
Assembling the FE-165
Fitting the Cable Management Net
The cable management net can be installed on the FE-165 to provide
stowage of additional cables or management of excessive cable
lengths and bundles.
1.
Fit the cable management net between the two rear legs of the
FE-165, securing in position with the four screws provided.
2.5 mm
Advertisement
Table of Contents
