Installation Instructions; Out Of The Box; Accessories; Figure 1 Standard Accessories - Vinten RADAMEC Fusion FH-100 Operator's Manual

Installation Instructions

Out of the box

Before unpacking the Head, always inspect the shipping container for evidence of damage and report any
damage immediately. Always place the shipping container in the upright position as marked on the packaging.
Warning!
!
Heavy 24.5 kgs (54.0 lbs)
Do not lift the Head by the camera cradle.
24.5 kg
54.0 lbs
Remove the Head from the packaging, ensuring that all transport packing and retaining fixings are removed.
Inspect the Head for any damage that may have occurred during shipping. Report any damage immediately to
Vinten Radamec or the local distributor.

Accessories

The Head is supplied with standard accessories (Figure 1) including four fixing bolts and washers used when
mounting the Head onto a tripod or pedestal mounting plate, a Vinten spanner and two telescopic pan bars for
use when the Head is operated manually.
Telescopic pan bar (2 off)
Part No. 3219-91
Washers (4 off)
Part No. L602-122
Vinten spanner
Part No. J551-001
Head fixing bolt (4 off)
Part No. L054-714

Figure 1 Standard Accessories

Optional accessories include a Vinten heavy-duty Quickfix adaptor (Part No. 3490-3) that allows operators to
easily and quickly mount and remove the Head from a pedestal or tripod, and an Intermediate Plate (Part No.
3384-11) used to raise the camera on the camera cradle, thereby adjusting the camera centre of gravity.
1