Table of Contents
Advertisement
SECTION 3 - MACHINE CONTROLS AND INDICATORS
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF POSITION WHEN RELEASED.
Ground Control Console
(See Figure 3-1.,Figure 3-2., Figure 3-3. and Figure 3-4.)
NOTE:
When Power/Emergency Stop switch is in the "ON" position and
engine is not running, an alarm will sound, indicating Ignition is
"ON".
WHEN THE MACHINE IS SHUT DOWN THE MASTER/EMERGENCY STOP SWITCH MUST
BE POSITIONED TO THE "OFF" POSITION TO PREVENT DRAINING THE BATTERY.
NOTE:
The Function Enable switch must be held down in
order to operate Telescope, Swing, Lift, Jib Lift,
Platform Level Override, and Platform Rotate
functions.
3-2
1. Indicator Panel.
The LED Indicator Panel contains indicator lights that signal
problem conditions or functions operating during machine
operation.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF POSITION WHEN RELEASED.
2. Telescope Control
Provides extension and retraction of
the boom.
3121630
Advertisement
Table of Contents
