TransAct Ithaca 8000 Programmer's Manual page 97

Programming Codes
Note: This command interacts with the Feed to Black Dot command. If
the printer is using Black Dot paper, the black dot position specified by this
command will be used for the Cover Close operation.
100-06908
0.8 (.20) to first line of print
m/203 (m/8) Dot Width
Back of Ticket
Rev D
®
Ithaca 8000 Programmer's Guide
n/203 (n/8)
Cut to Center of black dot
Dimensions in Inches (mm)
Page 83