TransAct Ithaca 8000 Programmer's Manual page 122

Programming Codes
[ESC] r <11> Begin 270 rotated print with two pass font
ASCII [ESC] r <11>
Hexadecimal 1BH 72H 0BH
Decimal <27> <114> <11>
IPCL &%RX11
EPOS none
[ESC] r <15> Begin 270 rotated print with two pass font and line formatting
ASCII [ESC] r <15>
Hexadecimal 1BH 72H 0FH
Decimal <27> <114> <15>
IPCL &%RX15
EPOS [ESC] T <1>
[ESC] r <0> End rotated print
ASCII [ESC] r <0>
Hexadecimal 1BH 72H 00H
Decimal <27> <114> <0>
IPCL &%R0
EPOS [ESC] { <0>
Description The [ESC] r <0> command prints the contents of the rotated print buffer
(when in 90
orientation. In 180 rotated mode, the printer returns to normal mode.
Characters in the print buffer that have not been printed are not printed.
Page 108
or 270 rotated mode) and returns to normal print
Rev D
®
Ithaca 8000 Programmer's Guide
Not available in page mode
Not available in page mode
100-06908