TransAct Ithaca 8000 Programmer's Manual page 130

Programming Codes
[ESC] ? Reassign graphic mode
ASCII [ESC] ? <m> <n>
Hexadecimal 1BH 3FH <m> <n>
Decimal <27> <63> <m> <n>
IPCL none
Description The [ESC] ? <m> <n> command reassigns graphic mode <m> to
resolution <n>. Possible values for <m> are K, L, Y, or Z. Resolutions,
<n>, are zero to seven as follows:
Where <m> 0
1
2
3
4
5
6
7
10
11
12
13
Note: Modes 11 through 13 are designed to support horizontal graphics
and not intended for APA graphics.
[ESC] U <1> Select unidirectional print
ASCII [ESC] U <1>
Hexadecimal 1BH 55H 01H
Decimal <27> <85> <1>
IPCL &%GU
EPOS ESC] U <1>
Description The [ESC] U <1> command prints all data in unidirectional print mode to
improve line to line registration for graphical data.
Note: Unidirectional print should be canceled before normal text is printed.
Print time is slowed if it is not canceled.
Page 116
60 dpi Full speed
120 dpi Half speed
120 dpi Full speed
240 dpi Full speed
80 dpi Full speed
72 dpi Full speed
90 dpi Full speed
144 dpi Full speed
104 x 96 dpi 1 horizontal, 1 vertical pass
208 x 96 dpi 2 horizontal, 1 vertical pass
104 x 192 dpi 1 horizontal, 2 vertical passes
208 x 192 dpi 2 horizontal, 2 vertical passes
Rev D
®
Ithaca 8000 Programmer's Guide
8-bit slices Default for K
8-bit slices Default for L
8-bit slices Default for Y
8-bit slices Default for Z
8-bit slices
8-bit slices
8-bit slices
8-bit slices
100-06908