Table of Contents
Advertisement
Receipt Printing, Auto Cutter Position
A receipt auto-cutter is a standard feature with all Ithaca™ 8000 Printers.
Cutter type
Media width
Media thickness range
Cut to line of print
Cutter life
Partial Cut tab:
Cut time:
Buzzer
A buzzer is provided as a standard feature. It is triggered upon command from the host
terminal to make a sound loud enough to be heard under noisy conditions. It will produce
a sound pressure level of at least 90 dBA, 1 foot from the front of the printer.
Cover Interlock
A paper cover interlock switch is provided as a standard feature. When the paper cover
is open, the printer is off-line, and will not print.
Display Pass Through
The display pass through feature allows a pole display to be interconnected with the
printer. The printer is connected to a host system with a special serial cable. The host
sends serial data to the printer and the printer sends serial data to the pole display. The
printer does not provide power to the display. During normal printer operation, no data is
passed to the display. In pass through mode, all received data is passed on to the
display.
Page 22
Rotary
3.13 +/- .02 inches (79.5 +/- .5 mm)
0.0025 to 0.0035 inch
0.70 inch
1,000,000 cuts
.125 inches +/- .0625 inches (right edge of receipt)
Less than 350 milliseconds
Rev D
100-06908
Advertisement
Table of Contents
Need help?
Do you have a question about the Ithaca 8000 and is the answer not in the manual?
Questions and answers