Table 44 Peripheral Status (<N> = 0, 48); Table 45 Paper Status - TransAct Ithaca 8000 Programmer's Manual

Programming Codes
Bit Off/On
0 Off
On
1 – 7
Off
Table 44 Peripheral Status (<n> = 0, 48)
Function Transmit Paper Sensor Status
ASCII [ESC] v
Hexadecimal 1BH 76H
Decimal <27> <118>
Description The [ESC] v command has been replaced by the [GS] r command. The [ESC] v
command transmits paper status has been replaced by the [GS] r command.
The Ithaca
Journal is enabled, Journal Low and Out are supported by this command
Electronic Journal Disabled
Bit Off/On
0,1 Off
On
2,3 Off
On
4 Off
5 Off
On
6 ON
7 Off
Electronic Journal Enabled
Bit Off/On
0 Off
On
1 Off
On
2 Off
On
3 Off
On
4 Off
5 Off
On
6 ON
7 Off

Table 45 Paper Status

Page 212
Hex Decimal
00H <0>
(03H) (3)
00H <0>
®
8000 return paper status as specified below.
Hex Decimal
00 <0>
02H <2>
00 <0>
04H <4>
00 <0>
00 <0>
04H <4>
20H <64>
00 <0>
Hex Decimal
00H <0>
01H <1>
00 <0>
02H <2>
00 <0>
04H <4>
00 <0>
08H <8>
00 <0>
00 <0>
04H <4>
20H <64>
00 <0>
Rev D
®
Ithaca 8000 Programmer's Guide
Status
Pin 3 is Low
Pin 3 is High
Not used; fixed to Off
Status
Receipt Paper present
Receipt Paper Low or not present
Cover is closed
Cover is open
Not used, fixed Off
Slip is present
Slip is not present
Fixed On
Not used, fixed Off
Status
Journal Space adequate > 8K
Journal Space Low < 8K
Receipt Paper present
Receipt Paper Low or not present
Cover is closed
Cover is open
Journal is active and not full (Cover
Closed)
Journal Full and has been disabled (or
Cover Open)
Not used, fixed Off
Slip is present
Slip is not present
Fixed On
Not used, fixed Off
If the Electronic
100-06908