Table of Contents
Advertisement
CPI selections from 8 to 30 CPI
Paper Out sensor
Multiple printer emulations: Ithaca M80/M80+, Ithaca M50/M151 Micro-line,
Epson Extended, Epson TM-T88II/III, TM-T90, U200, U300, Axiohm
A793/4/5, Citizen and Star
Maximum 8K buffer (adjustable)
2 Megabytes Flash Memory
2 Megabytes RAM
APA and Epson graphics
Bar Codes: Code 39, Code 93, Code 128, Interleaved 2 of 5, UPC-A, UPC-
E, EAN-8, EAN-13, EAN-14, PDF417 stacked symbology and Codabar
65 Language sets (including Euro symbol)
Metal receipt tear off
8 dots/mm. thermal print head resolution
ON/OFF button located on front of printer
Cable routing strain relief
Power/Error/Paper LEDs
Paper feed button
Cover open button
Settable cash drawer configurations (Ithaca, Epson, or Star)
Spill proof design- vertical main PCB mounting
58 mm. or 80 mm. paper width – factory-settable
4.0 inch (101 mm.) Paper roll diameter
Portrait/landscape printing under Windows
Page mode printing
Cover Open sensor
Electronic journal capability
Internal counters for hours on, cuts, print lines and errors
100 km print head life
60 million print line printer MCBF (excluding knife)
Strong break-away paper cover
1,000,000 cuts cutter life (partial cut)
Buzzer
1
Character spacing is adjustable from 1 to 30 CPI. Typical values will be between 8 and 20 CPI
depending on the font selected. Values of 13.3, 14.86, or 17.3 are typical for each resident font.
2
CPI's greater than 16 will not be supported in NLQ fonts
Page 12
1
Rev D
100-06908
Advertisement
Table of Contents
