TransAct Ithaca 8000 Programmer's Manual page 235

Programming Codes
Function Perform a partial knife cut
ASCII [ESC] m
Hexadecimal 1BH 6DH
Decimal <27> <109>
Description The [ESC] m command performs a partial knife cut.
This command will automatically feed paper to the black dot before the auto cut.
After the cut, the printer will relocate the paper to prevent the sticky part of the
label from coming to rest at a point that may cause it to stick to internal parts of
the printer.
Note: Defeating the alignment to the black dot or using paper without
black dots on sticky back paper will void the printer warrantee.
Note: If the printer does not have black dot paper installed the auto cut will
not attempt to feed to black dot.
Function Sound buzzer
ASCII [BEL]
Hexadecimal 07H
Decimal <07>
Description The [BEL] command sounds the internal buzzer, if equipped.
Function Sound buzzer
ASCII [ESC] BEL
Hexadecimal 1BH 07H
Decimal <27> <07>
Description The [ESC] BEL command sounds the internal buzzer, if equipped.
100-06908
®
Ithaca
Rev D
8000 Programmer's Guide
Page 221