Table 16 Euro Character Substitution Matrix - TransAct Ithaca 8000 Programmer's Manual

Programming Codes
[ESC] ^ Print control character
ASCII [ESC] ^ <n>
Hexadecimal 1BH 5EH <n>
Decimal <27> <94> <n>
IPCL &%CC <m1> <m2> <m3>
EPOS [ESC] ^ <n>
Description The [ESC] ^ <n> command allows characters from zero to 31 codes to be
printed. During normal operation, characters from zero to 31 are control
characters.
following character. <n> can be from zero to 255.
[ESC] [ C Insert Euro character
ASCII ESC] [ C <n>
Hexadecimal 1BH 5BH 43H <n>
Decimal <27> <91> <67> <n>
IPCL &%EU
Description The [ESC] [ C <n> command allows an application to replace any
character in the currently active character set with the Euro character.
The character to be replaced is defined by <n>. For example, if the
currently active character set is CP 850 (multi-lingual) and 0D5H
character is to be the Euro character, "1BH 5BH 43H 0D5H" replaces the
character at 0D5H with the Euro symbol.
Euro Character Substitution Matrix
Name
850
Turkey 857
Win Cyrillic
Win Turkish
Win Greek
Win Hebrew
Win Baltic

Table 16 Euro Character Substitution Matrix

Page 92
The command turns off control code translation for the
Epson IBM
26
57
52
51
50
62
68
Rev D
®
Ithaca 8000 Programmer's Guide
Code Page Insertion Point (hex)
850
857
1022
1021
1020
1032
1034
0xD5
0XD5
0X88
0X80
0X80
0X80
0X80
100-06908