Table of Contents
Advertisement
Programming Codes
is set during the wait time set by the [GS] z 0 command for paper
insertion and during the recovery confirmation time.
Where <n>
Bit 0 = 1 the
Bit 0 = 0 the button is enabled.
[ESC] p 4
Select paper sensor(s) to stop printing
ASCII
[ESC] p 4 <n>
Hexadecimal 1BH 70H 34H <n>
Decimal
<27> <112> <52> <n>
Range
0
n
Description The [ESC] p 4 <n> command selects the sensors that tell the printer to
stop printing. The default setting occurs when only the Paper Out sensor
stops printing. When the paper roll near-end sensor is enabled and the
sensor detects a near-end condition during printing, the printer completes
the current line and then automatically goes off-line. Replacing a new
paper roll restarts the printing. When the paper roll near-end sensor is
disabled and a paper near-end condition is detected during printing, the
paper out LED comes on, but the printer continues to print.
Note: The Ithaca
is always on.
<n> is defined as follows:
Bit
On/Off
0,1
Off
On
7
-
Table 18 Paper Sensor Commands
[ESC] p 3
Select paper sensor(s) to output paper-end signals
ASCII
[ESC] p 3 <n>
Hexadecimal 1BH 70H 33H <n>
Decimal
<27> <112> <51> <n>
Range
0
n
Description The [ESC] p 3 <n> command selects the paper sensor that outputs a
paper-end signal to the parallel interface when a paper-end is detected.
The default setting is when all sensors are enabled. (<n> = 15). It is
possible to select multiple sensors to output signals. If any of the sensors
detect a paper end, the paper end signal is output. The command is only
available with a parallel interface. The paper-end sensor is an option. If
the sensor is not equipped, the settings of bits 0 and 1 of the command
are not effective.
Page 162
button is disabled
FEED
255
®
does not allow the Paper Out sensor to be disabled. It
Hexadecimal
Decimal
00H
<0>
01H,02H,03H
<1>,<2>,<3>
00H
<0>
255
Rev D
®
Ithaca
8000 Programmer's Guide
Function
Paper roll near-end sensor disabled
Paper roll near-end sensor enabled
Undefined
100-06908
Advertisement
Table of Contents
