Table of Contents
Advertisement
MAINTENANCE/SERVICE
Fuels,
Fluids and
Lubricants (continued)
~'V'STEM CAPACITIES
Fuel Tank
Hydraulic System: Total (varies with options)
Reservoir Capacity
Bevel Gear Box
Power Wheel
Engine Cooling System: Gas
Diesel
Gas Engine Crankcase: Less Filter
With Filter
Diesel Engine Crankcase: Less Filter
With Filter
Air Conditioning System:
Refrigerant (R-12)
Mechanical Governor
(Gas Engine)
GREASING
n-tE
WINDROWER
TRACTOR
See "Fuels,
Fluids
and Lubricants• for recom-
mended
greases.
The following greasing points are marked on the
windrower by decals showing
a
grease gun
(A),
and
grease
interval (B) in
hours of
operation.
Use
the
hour meter
in
the
cab and the "Maintenance
Checklist•
provided
to keep a record of scheduled
maintenance.
Procedure:
SJ.
193 L
75 L
(approx.)
57
L
500 ml
840 ml
20 L
18 L
4.7
L
5.7 L
9.5 L
10.4
L
1.4 kg
75 to
90 ml
U.S.
51
gal.
20
gal.
(approx.)
15.2 gal.
17 oz.
28.4 oz.
5.3 gal.
4.8 gal.
5
qts.
6
qts.
10
qts.
11
qts.
3 lbs.
2Yz to 3 oz.
1. Wipe grease fitting with
a
clean cloth before
greasing, to avoid injecting dirt and
grit.
SAMPLE GREASE DECAL
2.
Inject grease through fitting with grease gun
until grease overflows. Inject grease slowly to
prevent seal damage.
3.
Leave excess grease on
fitting
to keep out dirt.
4.
Replace
any
loose
or
broken
fittings
Immediately.
5.
If fitting will not take grease, remove and clean
thoroughly.
Also clean lubricant
passageway.
Replace fitting if
necessary.
47
Advertisement
Table of Contents
