Table of Contents
Advertisement
Design and function
MIG/MAG welding
5.6.9.1
Selecting the display unit
AMP
HOLD
The operating point (welding performance) can be displayed as the welding current, material thickness or
wire speed.
Operating
element
Application example
Aluminium is to be welded.
•
Material = AlMg,
•
Gas = Ar 100%,
•
Wire diameter = 1.2 mm
The correct wire speed is not known and is to be determined.
•
Select the appropriate JOB (see "JOB list" sticker)
•
Switch to the material thickness display
•
Set the material thickness as appropriate (e.g. 5 mm)
•
Switch to the wire speed display
The resulting wire speed will be shown (e.g. 8.4 m/min).
38
Action
Result
Switching the display between:
n x
Welding current
AMP
Material thickness
Wire speed
Progress
Figure 5-12
VOLT
PROG
099-005023-EW501
09.08.2010
Advertisement
Table of Contents
Need help?
Do you have a question about the Phoenix 301 Progress puls and is the answer not in the manual?
Questions and answers