EWM Phoenix 301 Progress puls Operating Instructions Manual page 71

Operating
element
VOLT
PROG
VOLT
PROG
m/min
After approx. 5 s without further user intervention, the set values are
adopted and the display switches back to the program display,
• Key switch back to position "0"!
099-005023-EW501
09.08.2010
Action Result
Press button until "PROG" LED comes
on.
x Left: Wire feed speed
n
Right: Program number
Press button and hold down for approx.
4 s
4 s Left: Current limit value of the wire
feed speed correction
Right: Current limit value of the
voltage correction
Set limit value for the wire feed speed
correction
Set limit value for voltage correction
Design and function
MIG/MAG welding
Display (examples)
Left Right
71