Voltmeter; Process Control - Miller Maxstar 300 LX Owner's Manual

5-5.

Voltmeter

5-6.

Process Control

OM-2222 Page 26
1
1
1 Volt Meter
Displays output or open circuit volt-
age. If output is off, the voltmeter will
display (-−−).
1 Process Control
Press switch pad until desired pro-
cess LED is illuminated:
TIG HF Impulse - is a pulsed HF
(see Section 11-3) arc starting
method that can be used with either
AC or DC TIG welding. Make con-
nections according to Section 4-12.
TIG Lift-Arct - is an arc starting
method in which the electrode must
come in contact with the workpiece
(see Section 11-3). This method
can be used with either AC or DC
TIG welding. Make connections ac-
cording to Section 4-12.
Stick (SMAW) - This method can
be used with either AC or DC Stick
welding. Make connections ac-
cording to Section 4-13.