Audi A7 2023 Owner's Manual page 88

Storage and convenience
> Pull the cover out of the retainers in the direc-
tion of the arrow.
> To install the cover, slide it forward on the re-
tainers until they engage.
> Turn the knob to a vertical position.
Removing and installing the cover behind
the rear bench seat
» To remove the cover behind the rear bench seat
@, pull the cover in the direction of the arrow.
> Pull the cover upward to release.
> To install the cover, insert the left and right
sides of the cover into the mounts on the side
trim panel.
» Slide the cover forward until it locks into place.
Folding the outer backrests
Applies to: vehicles with folding backrests,
Fig. 69 Outer backrest: release lever and latching indicator
with red marking
The rear seat backrests can be folded forward ei-
ther separately or together.
Observe the safety precautions + page 84.
» Pull the release lever ( in the direction of the
arrow to fold the backrest forward.
> After the transport, fold the backrest up again
until it latches and the red marking @is no
longer visible.
86
Applies to: vehicles wit
Folding the center armrest
folding center armrest
Fig. 70 Center backrest: release lever
Observe the safety precautions © page 84.
» To fold the center backrest forward, pull the
lever @ in the backrest opening.
» After the transport, fold the center backrest up
until it locks into place.
Ti
jowns
Fig. 71 Luggage compartment: location of the tie-downs
Observe the safety precautions © page 84.
Tie-downs
There are tie-downs (@) in the luggage compart-
ment to secure pieces of luggage and objects.
» Use the tie-downs to secure the cargo.