Audi A7 2023 Owner's Manual page 53

Opening and closing
> If you would like to reprogram systems that are
already programmed, select on the home
screen: VEHICLE > Settings & Service > Garage
door opener. Press the 4 button and select 7
for the system to be reprogrammed. Select:
Program. Follow the instructions in the MMI.
With some systems, the garage door opener will
be immediately available after programming.
With other systems, the garage door opener
must also be synchronized.
Synchronizing!
Requirement: the hand transmitter must already
be programmed and the vehicle must be within
range of the system (such as the garage door).
If the system synchronization is performed di-
rectly after the programming procedure, follow
the instructions on the MMI.
If you would like to sync at a later time:
> Applies to: MMI: Select on the home screen:
VEHICLE > Settings & Service > Garage door
opener.
> Press the button for the system that you would
like to synchronize.
» Follow the instructions in the MMI.
Location pairing
Applies to: vehicles with location pairing
For easier operation, you can program your sys-
tem's location.
Requirements: the respective hand transmitter
must be programmed page 50 and the vehicle
must be located in front of the system.
» If you have programmed your system, follow
the instructions in the MMI. Or
If you would like to set up location pairing at an-
other time:
» Applies to: MMI: Select on the home screen:
VEHICLE > Settings & Service > Garage door
opener.
» Press the Z button.
» Press the / button for the system your vehicle
is facing.
1 Only applies to rolling code systems
» Select: Location pairing.
» Follow the instructions in the MMI.
Only a maximum of three systems can be dis-
played in the notification center > page 23. If you
would like to have all systems displayed, press
99 88.
Renaming programmed systems
You can rename the programmed systems ac-
cording to your preferences (names may have a
maximum of 10 characters).
» Ifyou have programmed your system, follow
the instructions in the MMI. Or
If you would like to change the name at another
time:
> Applies to: MMI: Select on the home screen:
VEHICLE > Settings & Service > Garage door
opener.
» Press the Z button.
» Press the 7 button for the system that you
would like to rename.
» Select: Rename. If necessary, delete the preset
name, such as Garage door opener 1.
> Follow the instructions in the MMI.
Deleting programmed systems
The programmed systems can be deleted individ-
ually or all at once.
> Applies to: MMI: Select on the home screen:
VEHICLE > Settings & Service > Garage door
opener.
> Press the Z button.
» To delete an individual system, press the 1)
button for the desired system. If the checkmark
¥ is set, select: Delete.
» To delete all systems, select: All > Delete.
~ Make sure the batteries in the hand trans-
mitter are charged before starting the pro-
gramming process.
The programming process may take up to
30 seconds. It may be necessary for the
51
>