Operating; Adjusting The Display - Audi A7 2023 Owner's Manual

Instrument cluster
Operating
y N
Fig. 3 Instrument cluster: driver information system
Fig. 4 Left side of multifunction steering wheel
Information is organized within various tabs @ in
the instrument cluster. The tab contents are dis-
played in the central area @).
Requirement: the ignition must be switched on.
Selecting a tab
» Press the <I/ > button @) repeatedly until the
desired tab is selected.
Returning to functions at higher levels
» Press the > button ©.
Opening and closing the menu
» Press the =] button ©).
Selecting and confirming a function
Requirement: a menu or list must be displayed.
» To select a function, turn the left thumbwheel
@ to the desired function.
» To confirm a selection, press the left thumb-
wheel @).
Switching the view
> Press the VIEW button @).
The following tabs may be available, depending
on vehicle equipment:
Firsttab _| Vehicle functions > page 16
Second tab | Driver messages (this is only dis-
played if at least one indicator
light/message is being displayed)
Third tab | Night vision assist (this is only dis |
played if the night vision assist
has been activated) © page 129
Fourth tab | Radio > page 209
Media > page 220
Fifthtab | Telephone page 182
Sixth tab | Navigation > page 197
Adjusting the display
F i g . 5 Upper display: adjusting the display
Switching the view
» Press the VIEW button to switch between the
default view @ and the enhanced view @).
Adjusting the layout
Depending on the vehicle equipment, various lay-
outs may be available.
» Applies to: MMI: Select on the home screen:
SETTINGS > Display & brightness > Audi virtu-
al cockpit.
» To adjust the desired layout, press @).
Setting the automatic layout change
Applies to: RS models
Requirement: depending on vehicle equipment,
the RS Performance or RS Runway layout must
be set.
» Applies to: MMI: Select on the home screen:
SETTINGS > Display & brightness > Audi virtu-
al cockpit > Configure > Automatic activation
of RS layout.
13
>