Software Update; Connected Devices - Audi A7 2023 Owner's Manual

Table of Contents

Advertisement

Additional settings
Bluetooth®
You can select a setting for visibility of the MMI
to other Bluetooth devices. To connect a new
Bluetooth device, the Visible setting must be se-
lected. If Invisible is selected, a Bluetooth con-
nection will only be possible with paired devices.
If Offis selected, no Bluetooth device can be con-
nected.
Bluetooth® audio player
When this function is switched on, the profile
will load automatically when your Bluetooth au-
dio player is within range.
Bluetooth® name
The MMI's Bluetooth name is displayed and can
be changed.
The name of the Wi-Fi hotspot and the Blue-
tooth name are automatically compared
when there are changes.
Factory default settings
Requirement: the ignition must be switched on.
» Applies to MMI: Select on the home screen:
SETTINGS > System maintenance > Restore
factory settings.
» Follow the system instructions.
The settings will be reset. The system will re-
start. This may take some time.
Make sure that not only the settings were de-
leted but also the stored data, if applicable.
Software
update
seals
cles with software update
You can update your vehicle's software.
The functions depend on the country and vehicle
equipment:
~Map material update for the navigation system.
= page 205.
232
~ Have the software update performed by an au-
thorized Audi dealer
or authorized Audi Service
Facility. This can result in additional costs.
~ Perform the installation only when the vehi-
cle is stationary. Otherwise, this increases
the risk of an accident
~ If the installation fails, contact an author-
ized Audi dealer or authorized Audi Service
Facility immediately to have the malfunc-
tion corrected.
Connected
devices
Displayed connected devices
Requirement: the vehicle must be stationary and
the ignition must be switched on.
> Applies to: MMI: Select on the home screen:
SETTINGS > Connected devices.
Possible menu items:
~Telephone 1
~Telephone 2
~ Audio player
— Wi-Fi
hotspot
— Headset
Smartphone interface
You can connect your smartphone to the MMI
© page 228.
myAudi app
This function is available if an appropriate Audi
app is installed on your mobile device and start-
ed, and if the mobile device is connected to the
vehicle's Wi-Fi hotspot.
Read the information about Audi connect, and
be sure to note the connectivity costs section
page 189.
Managing connected devices
Requirement: the connected devices menu must
be displayed > page 232.
>

Advertisement

Table of Contents
loading

Table of Contents