Audi A7 2023 Owner's Manual page 181

Telephone
Using the hands-free system
Requirement: your cell phone must be connected
to the MMI via a Bluetooth Hands Free Profile
(Bluetooth HFP).
You can use the hands-free system. You can make
calls using the antenna on your mobile device.
Sending and receiving messages
See ®page 187.
— Pay attention to any system prompts dis-
played on your mobile device or the MMI, for
example if the system should connect auto-
matically in the future. Depending on the
mobile device, you may need to download
contacts and confirm access to your mes-
sages separately.
~ You can also search for the MMI on your mo-
bile device using the Bluetooth device
search.
— You only have to pair your device one time.
Bluetooth devices that are already paired
automatically connect to the MMI when the
Bluetooth function is switched on, when
they are within range, and when the ignition
is switched on. The last connected mobile
device is given first priority.
— You can manage additional settings for con-
nected mobile devices in the Connected de-
vices menu * page 232.
— When leaving the vehicle, the Bluetooth
connection to the mobile device will auto-
matically disconnect. Depending on your
mobile device, phone calls in progress may
be automatically redirected from the MMI to
your mobile device so that you can continue
the call on your phone.
Using two telephones
Applies to: vehicles with telephone
You can connect two mobile phones to the MMI
at the same time using the Bluetooth HFP, for ex-
ample a business phone and a private phone. You
can be reached in your vehicle through both mo-
bile phones.
Applies to: mobile devices with Bluetooth Mes-
sage Access Profile (MAP): You can send and re-
ceive messages with both mobile devices
page 187.
Connecting another mobile device
Requirement: a mobile device must be connected
to the MMI. The vehicle must be stationary and
the ignition must be switched on. The Bluetooth
settings must be open on your mobile device dur-
ing the connection setup. The mobile device to be
connected must not be actively connected to any
other Bluetooth device.
» Enable the Bluetooth function and visibility on
the MMI © page 232 and the mobile phone.
» Applies to: MMI: Select on the home screen:
PHONE > [?, or
» Applies to: MMI: Select on the home screen:
SETTINGS > Connected devices > Telephone 1
or Telephone 2 > New connection.
» Follow the system instructions. The available
Bluetooth devices will be displayed after sever-
al seconds.
» Press on the desired mobile device in the list of
displayed Bluetooth devices.
> To update the list, press Q.
APIN for a secure Bluetooth connection will be
generated.
» Confirm the PIN on your mobile device.
» Follow the system instructions.
» Pay attention to any other system prompts on
the MMI and on your cell phone.
After connecting successfully
See > page 178, After connecting successfully.
Switching between two mobile devices
Requirement: phone 1 and phone 2 must be con-
nected to the MMI.
> Applies to: MMI: Select on the home screen:
PHONE > <1].
Read the information about Audi connect, and
be sure to note the connectivity costs section
= page 189.
179