Table of Contents

Advertisement

Navigation
To select a better route, you have the following
option:
> Notification: press F#. The better route will be
used for route guidance, or press on the notifi-
cation. Press on the information window for the
better route (for example @) > page 204,
fig. 135).
» Note in the traffic information: press on the
list entry @ © page 206, fig. 136. Press on the
information window for the better route (for
example @ © page 204, fig. 135).
Online traffic information
Applies to: vehicles
with navigation system and online traffi
information
The MMI can receive real-time online traffic infor-
mation about congestion, accidents, road con-
struction, and other incidents.
Requirement: the MMI must be connected to the
Internet > page 189, Audi connect. Traffic infor-
mation must be switched on in the MMI
= page 207.
Traffic information will be displayed on the
standard map © page 201, fig. 132.
Depending on vehicle equipment, online traffic
information may also be displayed on the satel-
lite map page 205.
— Having the online traffic information func-
tion switched on provides the most accurate
reports of traffic situations and traffic fore-
casting. Your vehicle transmits and process-
es its anonymous, encrypted position infor-
mation at regular intervals to the traffic da-
ta provider. You can switch off data transfer
at any time > page 304.
— The online traffic information network is
not available in all countries, and the cover-
age is not nationwide.
Settings
Applies to: vehicles with navigation system
You can adjust the navigation system settings in
the instrument cluster and in the MMI display
separately. The settings depend on the country
and vehicle equipment.
Accessing settings
> Applies to: MMI: Select on the home screen:
NAVIGATION > ©}.
Accessing settings using the multifunction
steering wheel
» Select in the instrument cluster: Navigation tab
>
button.
Assetting made using the multifunction steering
wheel only applies to the instrument cluster
map.
Map settings
Satellite map: see © page 205.
Traffic: you can display current traffic informa-
tion on the map.
~ Free flowing traffic
~ Traffic obstructions
~ Traffic incidents
Map colors
~ Automatic: the map display adapts to the light-
ing conditions (for example, by changing from
day to night when driving through a tunnel).
— Day or Night
Map orientation
~ 2D heading-up map/2D north-up map: the
current vehicle position is displayed. The map is
oriented in the direction of travel or to the
north.
~ 3D map: the current vehicle position is shown
ona three-dimensional map and is aligned to
the direction of travel.
~ Overview: the entire route from the vehicle po-
sition to the destination or the next stopover is
displayed on the map. The map is oriented to
the north.
Automatic zoom
~ On: the map scale is adapted automatically de-
pending on the type of road being traveled (ex-
pressway, highway, other roads) so that you al-
ways have an optimal overview of the road
ahead. When route guidance is active, the scale >
207

Advertisement

Table of Contents
loading

Table of Contents