Audi A7 2023 Owner's Manual page 127

Driving information
— If the traffic signs are completely or partially
covered, for example by trees, snow, dirt, or
other vehicles
—If traffic signs do not conform to the standard
format
— If traffic signs are damaged or bent
— If traffic signs are displayed on sign holders
with electronic signs
— If the traffic signs or the roadways have
changed, and the navigation data is no longer
up-to-date
— Observe the safety precautions and note the
limits of the assist systems, sensors, and
cameras page 119.
Under some circumstances, traffic sign rec-
cognition may not detect traffic signs correct-
ly or detect them at all. As a result, the sys-
tem may not display the correct speed limit
or any speed limit.
— Traffic sign recognition does not adapt your
vehicle's speed to match the speed limit.
~The display in the instrument cluster is
based on the units of measurement used for
speed in the country where the vehicle is be-
ing operated. As a result, a display of 50 in
the instrument cluster can mean either mph
or km/h, depending on the country.
'Applies to: vehicles with camera-based traffic sign recogni-
tion
Accessing traffic sign recognition
» Select in the instrument cluster: vehicle func-
tions tab > Traffic signs.
Setting a traffic sign based speed warning
» Applies to MMI: Select on the home screen: VE-
HICLE > Driver assistance > (3) > Speed warn-
ing.
You can select a warning threshold. If you exceed
this, then the current detected speed limit will be
shown in the display with an exclamation point
for the duration that it is exceeded and it will
blink for a short time.
Messages
Applies to: vehicles with camera-based traffic sign recogni-
tion
The following messages may appear depending
on the vehicle equipment:
Xi traffic sign recognition: currently unavaila-
ble. Camera view limited due to surroundings
The camera's visual field is covered. Clean the
windshield.
Xi traffic sign recognition: currently limited.
See owner's manual
This message appears if navigation system data
is not available, for example on newly-construct-
ed roads. The speed limit display will be tempo-
rarily limited, which increases the risk of an incor-
rect display. If this message continues to appear,
drive immediately to an authorized Audi dealer or
authorized Audi Service Facility to have the mal-
function repaired.
No traffic sign information available
Depending on the area, there is no valid naviga-
tion data and no speed limits were detected. This
may also appear if there is a recommended
speed, but no speed limit (for example when
driving on and off the expressway).
Malfunction! See owner's manual
The system may not function correctly so it has
been switched off. See an authorized Audi dealer
or authorized Audi Service Facility for assistance.
Function currently unavailable. See owner's
manual
If this message appears on vehicles without cam-
era-based traffic sign recognition, then the traffic
light information function is currently unavaila-
ble. See > page 127.
125