Audi A7 2023 Owner's Manual page 35

Personalization
To transfer existing destinations from the MMI to.
your myAudi account one time, confirm the sys-
tem prompts with Yes.
You can set a profile pictured for your myAudi
user at my.audi.com.
Adding a local user
Applies to: MMI
» Press Add user.
> Press Initiate setup.
» Press Local user.
» Follow the system instructions.
Editing users
Applies to: MMI
Requirement: the user must be selected and that
user's settings must be loaded.
> Press on the user.
Depending on the user type, available options
may include the following.
PIN protection: when this function is switched
on, the 4-digit myAudi PIN must be entered be-
fore any settings for this user can be loaded.
Remove user from vehicle: the user will only be
deleted in the vehicle from the list in the MMI.
Change name: you can change the name of the
local user.
Removing users
Applies to: MMI
» Select on the home screen: Users > 4 > one or
more entries > Delete. The user will only be de-
leted from the list in the MMI. The authoriza-
tions for the user in the vehicle (such as key
user) will not be removed.
~The guest user cannot be renamed.
—When changing users, the new user settings
are loaded in the vehicle.
—Ifa.user has the & symbol, PIN protection is
active. To switch off PIN protection, you can
edit the user.
— Depending on the country, you may be able
to use an Audi app or my.audi.com.
Applies to: vehicles with key user management
The vehicle owner must be set as the key user to
use some of the specific Audi connect vehicle
control services that depend on vehicle equip-
ment.
The key user automatically has remote access au-
thorization. This remote access authorization is
necessary to control certain functions that de-
pend on the equipment, such as Audi connect ve-
hicle control services, through the myAudi app.
Setting the key user
Requirement: a key user must not be set yet.
» To set a key user for the vehicle, you will need a
myAudi account. Register in the myAudi app or
at my.audi.com.
» Add your vehicle to the myAudi app.
» Follow the instructions in the myAudi app.
Managing additional users
Depending on the vehicle equipment, you can
grant authorization for additional users to use
Audi connect vehicle control services at my.audi.
com.
Removing the key user
If you remove the key user, all other users that
were stored by the key user at my.audi.com and
their authorizations will be deleted. It will no lon-
ger be possible to use the Audi connect vehicle
control services, depending on the vehicle equip-
ment.
Requirement: a key user must be set. The ignition
has been switched on with a vehicle key.
> Applies to: MMI: Select on the home screen:
USERS > © > Remove key user.
— Depending on the country and model there
may be an app other than the "myAudi app"
available for your vehicle. For additional in-
formation, see my.audi.com.
—You do not need to log into the vehicle with
'a myAudi user in order to use Audi connect
33
>