Table of Contents
Advertisement
2.
Click [LDAP Settings].
3.
Under "LDAP Authentication", select [Active] for [Authentication] to enable LDAP
authentication.
If necessary, also configure [Auto Logout Time (seconds)].
4.
Enter the administrator password if required.
5.
Click [Apply].
6.
Click [Program/Change/Delete LDAP Server].
7.
Select [Active] for [LDAP Search] to enable LDAP address search.
If necessary, also configure [LDAP Search Timeout].
8.
Under "Program/Change/Delete", select the LDAP server you want to configure, and
then click [Change].
"Edit LDAP Server" page appears.
9.
Enter the server's name in [Identification Name (Required)].
10.
Enter the server's host name or IP address in [Server Name (Required)].
11.
Enter the position within the LDAP directory's structure from which to start user searches in
[Search Base (Required)].
For example, if the search target is the sales department of ABC company, enter "dc=sales
department, o=ABC". (In this example, the description is for an active directory. "dc" is for the
organization unit, and "o" is for the company.)
Using the LDAP Authentication and Address Search Functions
441
Advertisement
Table of Contents
