Table of Contents
Advertisement
Selectable resolutions vary depending on where the original is set.
• When using the exposure glass:
75, 100, 150, 200, 300, 400, 500, 600, 1200, 2400, 4800, 9600, 19200 dpi, User defined
• When using the ARDF or ADF:
75, 100, 150, 200, 300, 400, 500, 600 dpi, User defined
6. Size:
Select the scanning size. If you select [User defined], enter the scanning size directly in the edit box. Also, you
can change the scanning size with your mouse in the preview area. You can select the unit of measure from
[cm], [inches], or [pixels].
7. Duplex or Scan task:
• Duplex (when using the ARDF, Type 2 model only)
Select this to scan both sides of an original using the ARDF. To use this function, also select paper and
binding orientations according the original.
• [2 Sided Portrait: Top to Top]: for portrait original with top-to-top binding
• [2 Sided Portrait: Top to Bottom]: for portrait original with top-to-bottom binding
• [2 Sided Landscape: Top to Top]: for landscape original with top-to-top binding
• [2 Sided Landscape: Top to Bottom]: for landscape original with top-to-bottom binding
• Scan task: (when using the exposure glass)
Displays a maximum of 10 previously used scan areas. To remove a scan task, select the number of the
task, and then click [Remove]. You can select [AutoCrop] to let the scanner automatically detect the size
of your original.
• If the scan data is larger than the memory capacity, an error message appears and scanning is
canceled. If this happens, specify a lower resolution and scan the original again.
Scanning from a Computer
197
Advertisement
Table of Contents
