Table of Contents
Advertisement
8. Configuring the Machine Using Web Image Monitor
Item
LDAP Search
LDAP Search Timeout
To configure LDAP server settings, select the desired LDAP server from the list under "Program/Change/
Delete", and then click [Change] to open the "Edit LDAP Server" page. The following settings can be
made on that page.
LDAP Settings
Item
Identification Name
(Required)
Server Name
(Required)
Search Base (Required) Enter the position within the LDAP directory's structure from which to start
Port Number
(Required)
SSL
342
Select whether to enable or disable LDAP search to retrieve addresses for
scanner and fax destinations.
Enter the number of seconds before the machine considers the LDAP search
to have timed out (1 to 60).
Enter the LDAP server's name. Can contain up to 32 characters.
Enter the LDAP server's host name or IP address. Can contain up to 64
characters.
user searches. Can contain up to 128 characters.
Enter the port number used to connect to the LDAP server. The valid range is
from 1 to 65535 (default is 389 when [SSL] is [Inactive], or 636 when
[SSL] is [Active]).
Select whether or not to use SSL to communicate with the LDAP server.
Select [Active] to encrypt communication between the machine and LDAP
server; select [Inactive] for communication without encryption.
Description
Description
Advertisement
Table of Contents
