Table of Contents
Advertisement
9. Troubleshooting
Message
Unsupported USB
Hub Please Remove
USB Disconnected
Press Clear key
USB Memory
Overflow Press Clear
key
Write Protect Press
Clear key
408
Causes
The Scan to USB function failed
because a USB device other
than a USB flash disk or a USB
flash disk with an unsupported
file system was used.
The Scan to USB function failed
because the USB flash disk was
removed before the operation
could be completed.
The Scan to USB function failed
because there was not enough
memory on the USB flash disk.
The Scan to USB function failed
because the machine could not
access the USB flash disk
properly.
Solutions
Use a USB flash disk that is compatible
with the Scan to USB function.
Check that the USB flash disk is securely
inserted in the machine. Do not pull out the
USB flash disk until "Ready" appears on
the display.
Use a USB flash disk with enough memory.
Use a USB flash disk that is not password-
or write-protected.
Advertisement
Table of Contents
