Table of Contents
Advertisement
1.
Press [Original].
2.
Press the [ ][ ] keys to select the desired scanning method, and then press the [OK] key.
Select the sides of the original (1 side or 2-sides) to scan. When scanning 2-sides, select the page
and binding orientations according to the original.
• Press the [Escape] key to discard the current change and return to the initial screen.
• If 2-sided scanning is specified, you must use the ARDF (scanning will not be possible with the
exposure glass).
• You can change the machine's default [Original] setting to always scan specific sides of originals.
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Auto Reset Timer] while
the initial screen is displayed.
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
• For details about [Original], see p.267 "Fax Transmission Settings".
• For details about [System Auto Reset Timer], see p.298 "Administrator Settings".
Sending a Fax
225
Advertisement
Table of Contents
