Using The Board; Product Overview - Analog Devices EVAL-AD2437A1NZ Manual

2 Using the Board

This chapter provides information on the major components and peripherals on the board, along with instructions
for installing and setting up the emulation software.

Product Overview

The board features:
• Analog Devices AD2437 - Audio Bus Transceiver
• Audio
• Analog Devices
• Analog Devices
• One 3.5mm audio jack
• Two RCA SPDIF Input and Output Connectors
• Four XLR connectors for audio interface for balanced +4dBu line level input.
• DB25 Connector for eight channels of +4dBu line level output
• A
2
B
• One Male and one female XLR connector with integrated light-ring for LED diffusion.
• LEDs
• Thirteen LEDs: more details will be in LED section
• Pushbuttons
• Three pushbuttons: Reset, SIO2, GPIO7
• External power supply
• 24V @3.0 Amps
EVAL-AD2437A1NZ Manual
ADAU1452 - SigmaDSP Digital Audio Processor
AD1937 - Four ADCs/Eight DACs with PLL, 192 kHz, 24-Bit Codec
Using the Board
2–1