Declaration Of Type Conformity - Sartorius Basiclite Installation And Operating Instructions Manual

Declaration of Type Conformity

C Marking on Sartorius Equipment
In 1985, the Council of the European Community approved a resolution
concerning a new approach to the technical harmonization and standardization
of national regulations. The organization for monitoring compliance with the
directives and standards concerning C marking is governed in the individual EU
Member States through the implementation of the EC Directives adopted by the
respective national laws. As of December 1993, the scope of validity for all
EC Directives has been extended to the Member States of the European Union
and the Signatories of the Agreement on the European Economic Area.
Sartorius complies with the EC Directives and European Standards in order to
supply its customers with weighing instruments that feature the latest advanced
technology and provide many years of trouble-free service.
The C mark may be affixed only to weighing instruments and associated
equipment that comply with the applicable Directive(s):
Council Directive 89/336/EEC "Electromagnetic compatibility (EMC)"
Applicable European Standards:
Limitation of emissions:
EN 50081-1 Residential, commercial and light industry
EN 50081-2 Industrial environment
Defined immunity to interference:
EN 50082-1 Residential, commercial and light industry
EN 50082-2 Industrial environment
Important Note:
The operator shall be responsible for any modifications to Sartorius equipment
and for any connections of cables or equipment not supplied by Sartorius
and must check and, if necessary, correct these modifications and connections.
On request, Sartorius will provide information on the minimum operating
specifications (in accordance with the Standards listed above for defined
immunity to interference).
31