Information On Ec Verification - Sartorius Basiclite Installation And Operating Instructions Manual

C
28

Information on EC Verification

Initial Verification
Performance of initial verification by Sartorius AG
is documented on the balance/scale by the
following label:
1. Explanation:
C: EC mark of conformity
Green "M": Initial verification has already been
performed on this instrument
98: Year in which the initial verification
was performed, in this case 1998
0111: In Germany, Sartorius AG has been
accredited by the Metrology authority
of Lower Saxony to perform EC
verification, Notified Body of the
European Community No. 0111.
2. The security strip is affixed after the initial
verification of weighing instruments of accuracy
class K, l and seals it against unauthorized
tampering with the metrological data. If the securi-
ty strip is damaged, the verification is not valid and
the weighing instrument is no longer approved for
legal metrology.
Therefore, please check the status of the security ID
label on your balance/scale.