Application Programs; Toggle Between Weight Units - Sartorius Basiclite Installation And Operating Instructions Manual

Application Programs

All application programs can also be used in legal metrology. Calculated
weight values are indicated by one of the following symbols displayed to the right
of the numerical value:
– Percentage
– Piece count
– Other calculated value = o
The application programs for calibrated balances/scales not intended for use in
legal metrology are labeled with a triangle # in the right side of the display (e.g.
averaging).

Toggle between Weight Units

With this application program you can toggle the display of a weight value back
and forth between two weight units.
Configure the "Toggle weight units" application in the operating menu:
See "Configuring the Balance/Scale" menu code 2.1. 2
Menu code
o 3. 1. 2 o
1. 7. 2
1
1. 7. 3 3. 1. 3
1
1. 7. 4 3. 1. 4
o = Factory setting
Function
§ To toggle the display between the 1st and 2nd weight units:
Press the v key
1
Changes in settings depend on the model.
12
= %
= pcs
Unit
Grams
1
Kilograms
1
Carats
(only for BL and GC models)
Conversion factor
1.000
0.001
5.000
Toggle weight units
Abbr. on
printout
g
kg
ct