Sartorius Basiclite Installation And Operating Instructions Manual page 5

Equipment Supplied
The equipment supplied includes the
components listed below:
– Balance/scale
– Weighing pan/load plate
– Pan support (only with models that
have a round weighing pan)
– Fastener for an antitheft locking
device
– AC adapter
– Operating instructions
Additional parts only for BL210S,
BL120S, BL60S, GC503:
– Shield ring
– Shield plate
– Dust cover
– Calibration weight
– Gem tray (only for GC503)
Installation Instructions
Your balance/scale is designed to
provide reliable weighing results under
normal ambient conditions. When
choosing a location to set up your
balance/scale, observe the following
so that you will be able to work with
added speed and accuracy:
– Set up the balance/scale on a
stable, even surface
– Avoid placing the balance/scale
in close proximity to a heater or
otherwise exposing the balance/
scale to heat or direct sunlight
– Protect the balance/scale from
drafts that come from open windows
or doors
– Avoid exposing the balance/scale
to extreme vibrations during
weighing
– Protect the balance/scale from
aggressive chemical vapors
– Do not expose the balance/scale to
extreme moisture over long periods
Conditioning the Balance/Scale:
Moisture in the air can condense on
the surfaces of a cold balance/scale
whenever it is brought into a
substantially warmer place. If you
transfer the balance/scale to a warmer
area, make sure to condition it for
about 2 hours at room temperature,
leaving it unplugged from AC power.
Seal on Balances/Scales
for accuracy class K and l :
EU legislation requires that a control
seal be affixed to the verified
balance/scale. The control seal
consists of a sticker with the "Sartorius"
logo. This seal will be irreparably
damaged if you attempt to remove it.
If the seal is broken, the validity of the
verification will become void, and you
must have your scale re-verified.
5