Sartorius Basiclite Installation And Operating Instructions Manual page 8

8
Leveling the Balance/Scale
Level the balance/scale any time you set it up in
a new location.
Use only the 2 front feet of the balance/scale
for leveling.
§ Turn the 2 rear feet until they are in position
(only for balances/scales with rectagular weighing
pans/load plates)
§ Turn the 2 front feet as shown here in the illustration
until the air bubble is centered in the level indicator
> In most cases, this will require several
adjustment steps
Antitheft Locking Device
To fasten an antitheft locking device, use the lug
located on the rear panel of the balance/scale.
§ Secure the balance/scale at the place
of installation, e.g., with a chain or a lock.