Application Programs - Sartorius ME415S Operating Instructions Manual

Restoring the Factory Settings
Each parameter has a factory setting.
In the Setup menu, you can choose to
have the following performed after
Yes
confirming with :
– Restore all factory settings in the Setup
menu
(Factory settings)
58

Application Programs

Soft Key Functions
Start
Start application
Weighing
Toggle to the basic
weighing function
Auto-Start Application When the
Power Goes On
In the Setup menu, you can select
whether the last application active
before you turn off the power starts
automatically when the power is turned
on again (Setup: Application para-
meters: Auto-start app. when power
goes on: On)
Using Verified Balances as Legal
Measuring Instruments in the EU*:
You can select any application
program on a verified balance.
Non-metric weights are identified by
the following symbols:
– Percent = %
– Piece count (counting) = pcs
o
– Calculated values =
* including the Signatories of the Agree-
ment on the European Economic Area
, G