7.
Repeat steps
4
through
mark
(Figure
19).
1. Drill mark (forward of the
lid)
Assembling the Rinse Nozzles
Owner provided material: PTFE sealant
1.
Assemble the rinse vane and bushing over the
shoulder bolt
(Figure
6
at the forward drill
Figure 19
2. Hole-saw bit—4.5 cm
(1-3/4 inch)
20).
1. Gasket
2. Bulkhead fitting
3. Rinse nozzle
2.
Assemble the rinse vane, bushing, and shoulder
bolt onto the rinse nozzle
3.
Apply PTFE thread sealant to the threads of the
rinse-nozzle.
g206494
4.
Install the rinse-nozzle assembly into the
bulkhead fitting and tighten by hand
5.
Assemble the gasket over the bulkhead fitting
(Figure
20).
6.
Repeat steps
nozzle.
10
Figure 20
4. Bushing
5. Rinse vane
6. Shoulder bolt
(Figure
20).
1
through
4
for the other rinse
g207947
(Figure
20).