Description; Qty; No Parts Required; Roller Bumper - Toro 03185 Installation Instructions Manual

Procedure
10
11
12
13
14
Note: The 27 inch rear roller brush kit (Model 03186), will not work with the rear grass basket on the Reelmaster 3100
Grass Basket Kit (Model 03185). The rear cutting unit can be fitted with the Rear Roller Scraper Kit (Part No. 114-9368) in
place of the rear roller brush kit.
1
Preparing the Machine

No Parts Required

Procedure
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the engine, and remove the key.
2
Mounting the Roller Bumper
Parts needed for this procedure:
1

Roller bumper

2

Flange-head screws (8 x 16 mm)

Procedure
Mount the roller bumper to the engine flange with 2
flange-head screws (8 x 16 mm); refer to

Description

No parts required
No parts required
No parts required
No parts required
No parts required
Figure 1.

Qty.

–
Adjust the front basket position.
–
Adjust the rear basket position.
–
Adjust the rear basket lip bracket.
–
Adjust the rear grass shield.
–
Adjust the roller bumper.
1. Roller bumper
3
Mounting the Hydro Guard
Parts needed for this procedure:
1

Hydro guard

1

Bolt (5/16 x 1 inch)

Procedure
1. Remove the bolt and nut securing the lower end of the
cable support bracket to the pump plate
Discard the bolt but retain the nut.
2
Use
Figure 1
2. Engine
(Figure
g012214
2).