Table of Contents
Advertisement
5
Installing the Pulley
Assembly, Belt Cover,
and Shoulder Bolt
Parts needed for this procedure:
1
Pulley assembly
1
Belt cover
Procedure
1. Remove the nut and washer from the right mower deck
pulley.
2. Install the pulley assembly to the right mower deck
pulley with the previously removed nut and washer
(Figure
11).
Important: For 48-inch mower decks, use the
small blower pulley.
For 54-inch and 60-inch mower decks, use the
large blower pulley.
3. Torque the nut to 136 to 149 N∙m (100 to 110 ft-lb).
54-inch mower deck shown
1. Existing pulley nut
2. Existing washer
3. Blower pulley
4. Install the new belt cover over the pulley assembly
using the 4 previously removed screws (1/4 x 1/2 inch)
as shown in
Figure
Figure 11
4. Existing deck (spindle)
pulley
5. Spindle
12.
1. Belt cover
6
Installing the Attachment
Mount
Parts needed for this procedure:
1
Stabilizer bracket
2
Carriage bolt (5/16 x 3/4 inch)
4
Locknut (5/16 inch)
2
Self-tapping screw (5/16 x 3/4 inch)
2
Bolt (5/16 x 1 inch)
1
Pivot frame
2
Hairpin cotter
2
Rod
2
Washer
Procedure
g201880
1. Remove the existing 2 bolts, 2 nuts, and hitch bracket
from the bottom of the engine guard
10
Figure 12
2. Screw (1/4 x 1/2 inch)
(Figure
g201435
13).
Advertisement
Table of Contents
