Toro 30479 Installation Instructions

Center Mower Deck
Serial Number 313000001 and After Groundsmaster
Traction Unit
Model No. 30479—Serial No. 403100000 and Up
Safety
Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
133-8061
Register at www.Toro.com.
Removing the Hydraulic
Motor
1. Park the machine on a level surface, lower the
mower deck, engage the parking brake, shut off
the engine, and remove the key.
2. Ensure that the traction pedal is in the N
position and the PTO lever is in the O
3. Remove the bolts securing the hydraulic motor
to the mower deck
4. Lift the motor off the mower deck and lay it on a
clean, out of the way, surface.
decal133-8061
Note:
aluminum coupler.
1. Hydraulic motor
5. Remove the elastomeric spider from inside the
pulley coupler
6. Inspect the elastomeric spider for wear and
replace it if it is worn. Retain it for installation on
the new front mower deck.
Form No. 3437-269 Rev A
®
Installation Instructions
(Figure 1).
Ensure that you do not damage
Figure 1
2. Mounting bolts
(Figure 2).
Original Instructions (EN) All Rights Reserved *3437-269* A
Printed in the USA.
4000-D
EUTRAL
position.
FF
g011511