Table of Contents
Advertisement
Figure 30
1. Straight-barb fitting
(outboard—rinse-tank
pump)
2. Hose clamp
3. Hose—20.3 cm (8 inches)
3.
Loosely assemble the straight-barb fitting at the
inlet of the filter head (filter assembly) into the
hose—20.3 cm (8 inches) with a hose clamp
(Figure
30).
4.
Assemble the free end of the hose—1.9 x 180
cm (3/4 x 71 inches) onto the straight-barb fitting
at the outlet of the filter head with a hose clamp
(Figure
31).
g219997
4. Straight-barb fitting
(inlet—filter head)
5. Arrow (toward the spray
tank)
1. Hose clamp
2. Straight-barb fitting
(outlet—filter)
5.
Adjust the position of the filter head so that
the bowl of the filter assembly is vertical and
tighten the 2 hose clamps by hand
and
Figure
31).
6.
Assemble the split convoluted tubing over the
hose—43.3 cm (17 inches) between the rinse
tank and the rinse-tank pump and secure the
tubing with 2 tie wraps
1. Cable ties
2. Hose—43.3 cm (17
inches)
15
Figure 31
3. Hose—1.9 x 180 cm (3/4
x 71 inches)
(Figure 30
(Figure
32).
Figure 32
3. Convoluted tubing (split)
g206824
g206821
Advertisement
Table of Contents
