Rinse-Tank Pump; Bolt (1/4 X 1-3/4 Inches); Washer (1/4 Inch); Serrated-Flange Nut (1/4 Inch) - Toro 41614 Installation Instructions Manual

5
Installing the Rinse-Tank
Pump
Parts needed for this procedure:
1

Rinse-tank pump

4

Bolt (1/4 x 1-3/4 inches)

4

Washer (1/4 inch)

4

Serrated-flange nut (1/4 inch)

1

Pump cover

Assembling the Pump to the
Machine
Owner provided material: PTFE sealant
1. Align the holes in the mounting-flange spacers
of the rinse-tank pump with the holes in the
saddle plate of the tank frame (Figure 24).
12
Figure 24
1. Washer (1/4 inch)
2. Bolt (1/4 x 1-3/4 inches)
3. Mounting-flange
(rinse-tank pump)
2. Assemble the rinse-tank pump to the saddle
plate (Figure 24) with 4 bolts (1/4 x 1-3/4 inches),
4 washers (1/4 inch), and 4 serrated-flange nuts
(1/4 inch).
3. Torque the bolts and flange nut to 1017 to 1234
N∙cm (90 to 101 in-lb).
4. Remove the dust plug from the 2-socket
electrical connector of the machine harness
labeled R P
INSE UMP
4. Serrated-flange nut (1/4
inch)
5. Saddle plate (tank frame)
(Figure 25).
g206594
g219470