Table of Contents
Advertisement
Figure 35
2015 Machines
1. Fuse block
2. Fuse (40 A)
3. Bolt and nut (electrical
panel)
4. 2-pin connector (delay
timer)
5. 2-socket connector
(machine wire harness)
6. Flange-head bolt (#10-24
x 1/2 inch)
7. Locknut (#10–24)
8. 5-socket connector
(machine wire harness)
9. Relay (5-pin)
10. 4-socket connector
(machine wire harness)
11. Power relay (4-pin)
1. Fuse (40 A)
2. Fuse block
3. Locknut (#10-24)
g035435
4. Electrical panel
3.
Install a fuse (40 A) to the open slot in the fuse
block as shown in
Figure
36.
Note:
If a lower amperage fuse already exists
in the slot, replace it with the fuse (40 A).
4.
Locate relay and power relay in line with the
other relays of the same style, and mount them
to the panel
with the 2 flange-head bolts (#10-24 x 1/2 inch)
and 2 locknut (#10-24).
5.
Locate the 4-socket connector and the 5-socket
connector on the main harness and connect
them to the relay (5-pin) and power relay (4-pin)
as shown in
17
Figure 36
2016 and After Machines
5. Flange-head bolt (#10-24
x 1/2 inch)
6. Power relay (4-pin)
7. 4-socket connector
(machine wire harness)
Figure
34,
Figure
(Figure
34,
Figure
35, or
Figure
34,
Figure
35, or
g219469
35, or
Figure
36)
Figure
36.
Advertisement
Table of Contents
