Figure 2
1. Battery cover
2. Strap
Figure 3
1. Positive battery cable
2. Positive battery post
2.
Disconnect the positive (red) cable from the
battery post
(Figure
3. Buckle
3. Negative battery post
4. Negative battery cable
3).
2
Preparing the Rinse Tank
Parts needed for this procedure:
1
Hose—1.9 x 73.7 cm (3/4 x 29)
1
Rinse tank
g014029
1
Tank cap
1
Bulkhead fitting
1
Clear gasket
1
Plastic flange nut
1
90° fitting
1
Retaining fork
1
Hose clamp
Cutting the Hose
1.
Measure 20.3 cm (8 inches) from the end of the
hose 1.9 x 73.7 cm (3/4 x 29) and mark that
location
(Figure
g029414
2.
Cut the hose at the mark with a utility knife so
that you have the following lengths of hose
section:
•
20.3 cm (8 inches)
•
53.3 cm (21 inches)
5
4).
Figure 4
g219388