Digital CMOS Camera C16240-20UP / C16240-20UP01 Instruction manual_Ver.1.3
13. TROUBLESHOOTING
If an abnormality occurs, look up the possible causes in the following tables and, if necessary, report
the details to Hamamatsu subsidiary or your local distributor.
13-1 IMAGE IS NOT TRANSFERRED
Cause
AC adapter or other cable is loose
AC adapter or other cable is broken
13-2 ALTHOUGH IMAGES ARE TRANSFFERED
Conditions
Scratches or discoloration visible
on the screen
Image is blurred
Only shadowed images are output
All screens overflow
Noise appears on the screen
58
Measures
Reconnect the cable
Replace the cable
Cause
Lens is dirty
Lens is not focused
Condensation appear
Lens mount cap has been
left on
Amount of light is too much
or too low
Too much amount of light
Exogenous noise
Poor connection of internal
connector
Defective circuit system
Measures
Wipe the lens
Contact a Hamamatsu
subsidiary or your local
distributor
Confirm the operating
environmental conditions
Remove the cap
Adjust amount of light
Reduce amount of light
Find and remove cause
Contact a Hamamatsu
subsidiary or your local
distributor
Chapter
7
7
Chapter
11
16
13
16