Table of Contents
Advertisement
9-5
STARTUP DCAM CONFIGURATOR
The following is a procedure to startup "DCAM Configurator".
1. Open "Setup.exe" in the DCAM-API software's folder.
If the DCAM-API software is not installed on your computer, insert the media of DCAM-API software in
the slot of your computer.
When it is inserted, "DCAM-API Setup" window is displayed automatically.
2. Click on "Tools".
3. Click on "DCAM Configurator".
Digital CMOS Camera C16240-20UP / C16240-20UP01 Instruction manual_Ver.1.3
21
Advertisement
Table of Contents
